PBM Walking Booms come with a Spraying Systems Model #43 Gunjet Shut-off, Liquid Filled Gauge, 5' Spray Bar with adjustable height and Pivoting rear wheel for maneuverability.
Models are available with 5 nozzles on 20" spacings or 9 nozzles on 10" spacings.
Manually Adjusted Boomless Nozzle Systems
Since PBM deals in more precise applications we have yet to develop a standard design for manually adjusted boomless nozzles, but with our vast experience and the simplicity of these systems we can quickly build a cost-effective Boomless nozzle system for you. PBM can build a boomless system to match your application. We have built systems that create patterns as wide as 50' and as narrow as 5'. Pattern widths can be easily adjusted by setting the nozzle to different heights. So if drift isn't an issue gather your rate per acre or 1000 square feet along with your minimum and maximum width requirements an get in contact with a PBM Salesperson.
The nozzle assembly illustrated to the left simply clamps to the steel rack of an ATV Cargo rack with two steel plates.
12 Volt Actuated Boomless Nozzle Systems
Our 12 Volt Actuated Boomless Nozzles were developed for roadside weed abatement. Pattern widths can be adjusted by the flip of a switch. For best results set the most common desired pattern width/height with the nozzle angle parallel to the ground. The model shown is a model #140 Boom Buster Brand and produces 2.4 gpm at 40 psi nozzle. This throws a consistent 16-1/2' swath when in the recommended horizontal position.
We also offer combination boom shut-off/pitch adjustment control boxes and wire harnesses.
This system can be modified with other brands and different sizes of nozzles.
